Return to search

An Evaluation of a 3D Sampling Technique and LiDAR for the Determination of Understory Vegetation Density Levels in Pine Plantations

A three dimensional sampling technique was used to compare field understory conditions in Southeastern Louisiana using a laser range finder at three height levels (0.5m, 1.0m, and 1.5m) to LiDAR generated understory conditions to determine if a relationship existed. A similar comparison was made between densitometer crown closure measurements and understory LiDAR vegetation counts. A comparison between overstory LiDAR counts and understory LiDAR counts was also performed. LiDAR and understory counts exhibited a significant linear relationship but were poorly correlated at each sample level (Level-1 R2 = 0.34 ? 0.38, Level-2 R2 = 0.36 ? 0.43). The Level-3 LiDAR slope coefficient was non-significant. The crown closure versus understory linear model did not produce any significant results. The overstory LiDAR versus understory LiDAR model produced a moderate correlation (R2 = 0.5226) and was significant. The process of relating LiDAR points to understory conditions was not repeatable, even in the same geographic region.

Identiferoai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-1517
Date05 May 2007
CreatorsClarkson, Matthew Thomas
PublisherScholars Junction
Source SetsMississippi State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations

Page generated in 0.0015 seconds