Return to search

Four-Dimensional Passive Velocity Tomography of a Longwall Panel

Velocity tomography is a noninvasive technology that can be used to determine rock mass response to ore removal. Velocity tomography is accomplished by propagating seismic waves through a rock mass to measure velocity distribution of the rock mass. Tomograms are created by mapping this velocity distribution. From the velocity distribution relative stress in the rock mass can be inferred, and this velocity distribution can be mapped at specific time intervals.

Velocity tomography is an appropriate technology for the study of rockbursts. Rockbursts are events that occur in underground mines as a result of excessive strain energy being stored in a rock mass and sometimes culminating in violent failure of the rock. Rockbursts often involve inundation of broken rock into open areas of the mine. They pose a considerable risk to miners and can hinder production substantially.

The rock mass under investigation in this research is the strata surrounding an underground coal mine in the western United States, utilizing longwall mining. The mine has experienced rockbursts. Seismic data were collected over a nineteen day period, from July 20th, 1997 to August 7th, 1997, although only eighteen days were recorded. Instrumentation consistsed of sixteen receivers, mounted on the surface, approximately 1,200 feet above the longwall panel of interest. The system recorded and located microseismic events, and utilized them as seismic sources.

The data were analyzed and input into a commercial program that uses an algorithm known as simultaneous iterative reconstruction technique to generate tomograms. Eighteen tomograms were generated, one for each day of the study. The tomograms consistently display a high velocity area along the longwall tailgate that redistributes with face advance. Numerical modeling and mine experience confirm that the longwall tailgate is subject to high stress. Additionally, microseismic events are correlated with the velocity tomograms.

Velocity tomography proves to be an effective method for the study of stress redistribution and rockburst phenomena at underground longwall coal mines, because it generates images that are consistent with prior information about the stress state at the mine and with numerical models of the stress in the mine. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/36332
Date13 January 2006
CreatorsLuxbacher, Kramer Davis
ContributorsMining and Minerals Engineering, Westman, Erik C., Novak, Thomas, Karfakis, Mario G.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/octet-stream, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationAppendix_H.wmv, Luxbacher_Thesis.pdf

Page generated in 0.0017 seconds