The beginning of the 21st century sees great development and demands on wireless communication technologies. Wireless technologies, either based on a cable replacement or on a networked environment, penetrate our daily life more rapidly than ever. Low operational power, low cost, small form factor, and function diversity are the crucial requirements for a successful wireless product. The receiver??s front-end circuits play an important role in faithfully recovering the information transmitted through the wireless channel.
Bluetooth is a short-range cable replacement wireless technology. A Bluetooth receiver architecture was proposed and designed using a pure CMOS process. The front-end of the receiver consists of a low noise amplifier (LNA) and mixer. The intermediate frequency was chosen to be 2MHz to save battery power and alleviate the low frequency noise problem. A conventional LNA architecture was used for reliability. The mixer is a modified Gilbert-cell using the current bleeding technique to further reduce the low frequency noise. The front-end draws 10 mA current from a 3 V power supply, has a 8.5 dB noise figure, and a voltage gain of 25 dB and -9 dBm IIP3.
A front-end for dual-mode receiver is also designed to explore the capability of a multi-standard application. The two standards are IEEE 802.11b and Bluetooth. They work together making the wireless experience more exciting. The front-end is designed using BiCMOS technology and incorporating a direct conversion receiver architecture. A number of circuit techniques are used in the front-end design to achieve optimal results. It consumes 13.6 mA from a 2.5 V power supply with a
5.5 dB noise figure, 33 dB voltage gain and -13 dBm IIP3.
Besides the system level contributions, intensive studies were carried out on the development of quality LNA circuits. Based on the multi-gated LNA structure, a CMOS LNA structure using bipolar transistors to provide linearization is proposed. This LNA configuration can achieve comparable linearity to its CMOS multi-gated counterpart and work at a higher frequency with less power consumption. A LNA using an on-chip transformer source degeneration is proposed to realize input impedance matching. The possibility of a dual-band cellular application is studied. Finally, a study on ultra-wide band (UWB) LNA implementation is performed to explore the possibility and capability of CMOS technology on the latest UWB standard for multimedia applications.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/2757 |
| Date | 01 November 2005 |
| Creators | Xin, Chunyu |
| Contributors | Sanchez-Sinencio, Edgar |
| Publisher | Texas A&M University |
| Source Sets | Texas A and M University |
| Language | en_US |
| Detected Language | English |
| Type | Book, Thesis, Electronic Dissertation, text |
| Format | 4079542 bytes, electronic, application/pdf, born digital |
Page generated in 0.002 seconds