Yes / Fretting wear has a significant influence on wire rope fatigue life when in cyclic bending, particularly for crossed-wire
contacts, where the interfacial motion of the surfaces is complex and multi-axial. To simulate these contacts in a
controlled manner, a laboratory-scale, crossed-cylinder, reciprocating fretting wear test was developed. A broad range of
contemporary lubrication technologies were evaluated using this method and a systematic multivariate statistical analysis
was performed to identify the most significant lubrication-related parameters with respect to these fretting wear
conditions. Wear area increase per slip cycle was the most relevant measure of wear damage, as this captured the
influence of changes in the fretting wear regime during the test. The ability of a lubricant to reduce damaging fretting
wear during the run-in phase was the biggest influence on long-term fretting wear, particularly for grease-lubricated
contacts.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/17677 |
| Date | 19 February 2020 |
| Creators | Dyson, C.J., Chittenden, R.J., Priest, Martin, Fox, M.F., Hopkins, W.A. |
| Publisher | Taylor & Francis |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Accepted manuscript |
| Rights | © 2020 Taylor & Francis. The Version of Record of this manuscript has been published and is available in Tribology Transactions, March 2020 https://doi.org/10.1080/10402004.2020.1733154., Unspecified |
Page generated in 0.0024 seconds