[Truncated abstract] The influence of environmental conditions and properties of pyritic shale in the mining waste from Mt. Whaleback in Western Australia, in particular the inclusions and encapsulation of pyrite on the oxidation of pyritic shale and its subsequent acid mine drainage, was studied by employing an isothermal batch reactor system and QEMSCAN technique. The experimental technique was validated by comparing the experimental results obtained in this study with the literature data. It was found that the presence of water significantly accelerates the rate of shale oxidation. Weathering of the shale samples was found to influence the O2 consumption rate. It was also found that shale properties have a major effect on the oxidation rate and thereby affect the acid generation. Static test methods (Sobek and Lawrence) were employed to test the Neutralisation Potential (NP) of more than 100 actual and composite samples including pyritic shale samples, rock samples, mineral samples, various pyrite-mineral, pyrite-shale, and pseudo-shale blends. The influence of sample properties (bulk elemental composition, and mineralogy), test technique (Sobek and Lawrence) and associated variables (acid strength and volume) on the acid neutralisation potential of the samples was studied. It was found that the Sobek method produced consistently higher NP results under comparable acid conditions to those obtained with the Lawrence method. The theoretical NP values of individual minerals were calculated based on the mineral composition combined with the acid neutralising equations and ideal chemical formula. ... To experimentally model the major mineral phases, 11 minerals were used to produce pyrite-mineral blends and pseudo-shales, whose compositions mimic those of the actual shales studied. Mineral blends were employed to evaluate and contrast their individual acid generation or neutralisation behaviour with binary and higher order interactions. Blends of pyrite with some selected shales were also employed in this study. It was found that interactions can occur between the multiple mineral components which can enhance the rate of acid generation beyond that of the individual behaviour. It was found that the products from the pre-oxidation of shales, the properties and morphology of a sample such as the surface area, encapsulation, the mineralogy and pH all play a significant role in the acid generation and neutralisation rates. However, the absolute rate of acid generation appears to be most sensitive to the components such as Fe3+, which contribute to its reaction mechanisms. This investigation has provided a scientific insight into the acid generation and neutralisation behaviour of pyritic shale in relation to its mineralogy. It was found that the relative instantaneous rates of acid generation and consumption for individual minerals can be significantly different to that of their total potentials for acid generation and neutralisation. The significantly different behaviour of the actual and pseudo shales suggests that at low pH, there may be other mechanisms underlying the net capacity and rates of shales to generate or consume acid than bulk mineralogy. These findings have significant implications to the mining industry operating in reactive grounds.
| Identifer | oai:union.ndltd.org:ADTP/290300 |
| Date | January 2010 |
| Creators | Song, Meining |
| Publisher | University of Western Australia. Centre for Petroleum, Fuels and Energy, University of Western Australia. School of Mechanical Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Meining Song, http://www.itpo.uwa.edu.au/UWA-Computer-And-Software-Use-Regulations.html |
Page generated in 0.0022 seconds