Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2016. / The high cost of fossil fuels and the fact that the world has arguably reached its peak oil production, has driven the need to seek alternative fuel sources.
The main objective of the current study is to determine the performance of a laboratory-mounted diesel engine when fuelled with varying laboratory prepared biofuel and biodiesel and whether the advancement of the injection timing parameters will improve the engine power output and improve the smoke effect of these different fuel blends. The laboratory prepared biofuels used in this project range from 100% bio-fuel (BF100) to 50%, 30% and 10% biodiesel blends (BF50, BF30 and BF10, respectively). It should be noted that these blends are not commercially available, since they were blended in the laboratory specifically for these tests. The overall results of the study show that there is a distinct opportunity for using certain bio-fuel blends in specific applications as the power outputs are no more than one quarter less than that of base diesel. Concomitantly, the smoke opacity in all of the blends is lower than that of base diesel, which is a significant benefit in terms of their overall air emissions.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cput/oai:localhost:20.500.11838/2436 |
| Date | January 2016 |
| Creators | Sinuka, Yonwaba |
| Contributors | Odendaal, F, Makhomo, S |
| Publisher | Cape Peninsula University of Technology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Rights | http://creativecommons.org/licenses/by-nc-sa/3.0/za/ |
Page generated in 0.0012 seconds