Decision Feedback Equalization (DFE) in a data recovery channel filters
the bit decision in the current symbol period in generating the sample at the
comparator in the subsequent clock period. The operations of sampling,
comparing, filtering the decision bits into a feedback signal, and subtraction of
that feedback signal are cascaded, thereby establishing the critical timing path.
Thus, this system, though simple, requires its components to have large
bandwidths in order to achieve the high-speed response necessary to perform
the described feedback function. For the entire system to run at speeds
comparable to those of competing technologies (100MHz to 250MHz), the
components must have bandwidths greater than 100MHz, and work together to
provide a loop bandwidth of at least 100MHz.
A 300MHz latching comparator and a 125MHz 6-bit current-DAC were
designed in a 5V, 1 um CMOS n-well process for use in a DFE loop. Both blocks
are fully differential and achieve an accuracy of 1/2 LSB (10uA) over a differential
signal range of 1.28mA. This is true for their operations at speed, in isolated
simulation and as contiguous blocks. The DAC power consumption is relatively
high at 23mW, due to internal switching circuits which require a static current,
but the comparator's power consumption is minimal at 5mW. / Graduation date: 1997
Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/34236 |
Date | 05 September 1996 |
Creators | Engelbrecht, Linda M. |
Contributors | Kenney, John G. |
Source Sets | Oregon State University |
Language | en_US |
Detected Language | English |
Type | Thesis/Dissertation |
Page generated in 0.0014 seconds