In order to apply to S-Band (1-4.5 GHz) of wireless communication system, we designed and fabricated a high-insolating RF-MEMS switch by surface micromachining technology in this study.
In terms of the micro switch, we performed the structural design, high frequency simulation, components process integration and high-frequency measurement in this study. Especially for making components be high-isolation, low-loss and low-driving voltage, we proposed the following three methods: (i) adjusting the space and width of the transmission lines to improve the RF performance; (ii) applying the stress imbalance, by using dual metal composite top electrode, to form a arched contact electrode and reduce the drive voltage efficiently; (iii) using non-isometric spring structure to stabilize the electrode movement of the components. Besides, we did the optimizing simulation for this study, which were supported by Ansoft-HFSS and ADS, in terms of the micro switch which has different structural design as mentioned above.
The size of the optimized RF micro-switch which we developed for this study is only 145 £gm ¡Ñ 205 £gm. Switched from on-state to off-state, the component needs 36.5V drive voltage only. According to the result of the commercial network analyzer in 1-4.5GHz frequency range, the isolation rate of the components reaches -59.721dB while off-state; the insert los reaches -1.625dB while on-state.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0903110-014743 |
Date | 03 September 2010 |
Creators | Chien, Wei-Hsun |
Contributors | I-Yu Huang, Wei-Leun Fang, Jin-Chern Chiou, Ruey-Shing Huang, ken-huang Lin |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0903110-014743 |
Rights | not_available, Copyright information available at source archive |
Page generated in 0.0014 seconds