Return to search

Analytical Modeling Of Quantum Thershold Voltage For Short Channel Multi Gate Silicon Nanowire Transistors

Silicon nanowire based multiple gate metal oxide field effect transistors(MG-MOSFET) appear as replacements for conventional bulk transistors in post 45nm technology nodes. In such transistors the short channel effect(SCE) is controlled by the device geometry, and hence an undoped (or, lightly doped) ultra-thin body silicon nanowire is used to sustain the channel. The use of undoped body also solves several issues in bulk MOSFETs e.g., random dopant fluctuations, mobility degradation and compatibility with midgap metal gates. The electrostatic integrity of such devices increases with the scaling down of the body thickness. Since the quantization of electron energy cannot be ignored in such ultra-thin body devices, it is extremely important to consider quantum effects in their threshold voltage models.
Most of the models reported so far are valid for long channel double gate devices. Only Munteanu et al. [Journal of non-crystalline solids vol 351 pp 1911-1918 2005] have reported threshold voltage model for short channel symmetric double gate MOSFET, however it involves unphysical fitting parameters. Only Munteanu et al.[Molecular simulation vol 31 pp 839-845 2005] reported threshold voltage model for quad gate transistor which is implicit in nature. On the other hand no modeling work has been reported for other types of MG-MOSFETs (e.g., tri gate, cylindrical body)apart from numerical simulation results.
In this work we report physically based closed form quantum threshold voltage models for short channel symmetric double gate, quad gate and cylindrical body gate-all-around MOSFETs. In these devices quantum effects aries mainly due to the structural confinement of electron energy. Proposed models are based on the analytical solution of two or three-dimensional Poisson equation and one or two-dimensional Schrodinger equation depending on the device geometries. Judicial approximations have been taken to simplify the models in order to make them closed form and efficient for large scale circuit simulation. Effort has also been put to model the quantum threshold voltage of tri gate MOSFET. However it is found that the energy quantization in tri gate devices are mainly due to electronic confinement and hence it is very difficult to develop closed form analytical equations for the threshold voltage. Thus in this work the modeling of tri gate devices have been limited to long channel cases. All the models are validated against the professional numerical simulator.

  1. http://hdl.handle.net/2005/969
Identiferoai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/969
Date07 1900
CreatorsKumar, P Rakesh
ContributorsMahapatra, Santanu
Source SetsIndia Institute of Science
Languageen_US
Detected LanguageEnglish
TypeThesis
RelationG23464

Page generated in 0.0017 seconds