This experimental study focuses on the links that exist between the mechanical pull-out behaviour of multi-filament yarns embedded in concrete and the impregnation of the yarn by the concrete. To this aim, 5 glass yarns have been embedded in concrete (AR and E glass yarns from assembled or direct roving). A pre-treatment was applied to the yarn before the casting, and was chosen in the following three: wetting, drying or pre-impregnation with a cement slurry. By this way, 15 yarn / pre-treatment combinations were obtained that generate 15 conditions of impregnation of the yarn by the cementitious matrix. In each case, the mechanical properties were determined from a classical pull-out test and the yarns impregnation properties were characterized by two dedicated tests: yarns porosity measurements and along yarn water flow measurements.
By studying the relationship between the mechanical behaviour and the physical properties of the impregnated yarns, it is shown that the pre- and post-peak behaviour are mainly connected to the flow rate measured during the water flow measurements, which suggest a specific influence of the connected pores parallel to the filaments and of the penetration depth of the matrix into the yarn. The postpeak and the residual behaviour are moreover linked to the yarn pore volume associated to the disorder induced in the filaments assembly by the penetration of the matrix. The overall result of this work is a contribution to the understanding of the relationship between the impregnation of the yarns and the pull-out behaviour.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-77795 |
Date | 01 December 2011 |
Creators | Fiorio, Bruno, Aljewifi, Hana, Gallias, Jean-Louis |
Contributors | Technische Universität Dresden, Sonderforschungsbereich 528 |
Publisher | Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | doc-type:conferenceObject |
Format | application/pdf |
Source | Textilbeton in Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6). - Dresden: Technische Universität, 2011. - S. 41 - 60 |
Page generated in 0.0027 seconds