Sudan is endowed with a great diversity of tree species; nevertheless the utilization of wood resources has traditionally concentrated on a few species only. Despite of the richness of Sudan in most of basic factors required to establish forest based industries it still almost entirely dependent on imports to satisfy its needs of the products of such industries. There is an urgent need to assess the suitability of the local fibrous raw materials for industrial utilization, this would not only reduce imports, but they would also provide an economic incentive to the forestry and industrial sectors of Sudan.
Sudan has a wide variation of climatic zones, thus; great variations are expected in the anatomical and physical properties between and within species grown in each zone. This variation needs to be fully explored in order to suggest best uses for the species.
The present study was carried out to assess the suitability of Acacia seyal var. seyal Del and Balanites aegyptiaca (L.) Delile wood for pulp and paper making (PPM) and flooring industry, as well as to investigate the effect of rainfall zones on selected wood properties. For this purpose, a total of thirty trees per species were collected from four states in Sudan, namely: Blue Nile, North Kordofan, South Kordofan and White Nile. The study areas located in two precipitation zones. Zone one with 273 mm mean annual rainfall, and zone two with 701 mm mean annual rainfall. Wood samples in form of disc were obtained from two heights within each tree, which are 10 % and 90 % from the tree merchantable height. Anatomical, physical and mechanical investigations were conducted in order to test the wood properties of the study species. The studied anatomical properties were: fibre and vessel diameter, lumen diameter and wall thickness.
In addition to fibre length and three fibre derived values, namely: flexibility coefficient, Runkel ratio and slenderness ratio. The trend of fiber length from pith to bark was determined. The anatomical composition was described. Wood density was investigated as a main physical property. Basic density as well as air dry density were measured in the current study. Additionally, the density was measured using X-ray densitometry method in order to assess its suitability as a valid tool for the study species density determination. The trend of wood basic density from pith to bark was also determined. Brinell hardness strength was measured in the transverse and radial sections. According to the study results, the fibre length of both species considered as medium (900 -1600 μm).
However, Acacia seyal has longer fiber. Acacia seyal wood density considered heavy (≥ 720 kg/m³) while that of Balanites aegyptiaca is medium (500 - < 720 kg/m³). Depending upon the mean values of hardness strength in transverse as well as radial sections, the wood of both species can be classified as very hard (up to 146 N/mm2 hardness strength). Fibre length and wood density for both species followed the increase trend from the pith to the bark. The X-ray densitometry technique is considered as a valid tool for wood density determination for both species. For each species, some wood properties (in mature wood) were significantly affected by the water stress in the drier zone.
For instance, Acacia seyal fibre length was negatively affected, while vessel wall thickness, basic density as well as hardness strength of the radial section were positively affected. In case of Balanites aegyptiaca the following properties were affected: vessel dimensions (negatively) and basic density (positively). However, the water stress did not affect Acacia seyal fibre and vessel diameter and lumen diameter, fiber wall thickness, flexibility coefficient, Runkel ratio and hardness strength in transverse section. Balanites aegyptiaca fibre characteristics and hardness strength did not show any response to water stress as well.
In general, the overall wood properties of the study species considered compatible for PPM and flooring industry. However, trees growing in the more humid zone are preferable for both industries, due to their lower wood density and longer fibres in case of Acacia seyal and lower density in case of Balanites aegyptiaca.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-158073 |
Date | 17 December 2014 |
Creators | Mohamed Shawgi Gamal, Hanadi |
Contributors | Technische Universität Dresden, Fakultät Umweltwissenschaften, Prof. Dr. Dr. Claus-Thomas Bues, Prof. Dr. Andreas Roloff, Prof. Dr. Dr. František Hapla |
Publisher | Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | doc-type:doctoralThesis |
Format | application/pdf, application/pdf, application/zip |
Page generated in 0.0021 seconds