As a valuable asset in human augmentation and medical rehabilitation, exoskeletons have become a major area for research and development. They have shown themselves to be effective tools for training and rehabilitation of individuals suffering from limited mobility. However, most exoskeletons are not capable of balancing without the assistance of crutches from the user. Leveraging technology and techniques developed for force controlled humanoid robots, a project was undertaken to develop a fully self-balancing, compliant lower-body robotic exoskeleton. Due to their many beneficial features, series elastic actuators were utilized to power the joints on the exoskeleton. This thesis details the development of four linear series elastic actuators (LSEA) as part of this project. All 12-degrees of freedom will be powered by one of these four LSEA's. Actuator requirements were developed by examining human gait data and three robot-walking simulations. These four walking scenarios were synthesized into one set of power requirements for actuator development. Using these requirements, analytical models were developed to perform component trade studies and predict the performance of the actuator. These actuators utilize high-efficacy components, parallel electric motors, and liquid cooling to attain high power-to-weight ratios, while maintaining a small lightweight design. These analyses and trade studies have resulted in the design of a dual-motor liquid-cooled actuator capable of producing a peak force 8500N with a maximum travel speed of 0.267m/s, and three different single-motor actuators capable of producing forces up to 2450N continuously, with a maximum travel speeds up to 0.767m/s. / Master of Science / Patients who suffer a severe back injury that results in paralysis from the waist down (paraplegia) commonly regain mobility in their daily lives by using a wheelchair. However, staying in a seated position for long periods can cause serious medical issues to arise. In order to address these issues, lower-body exoskeletons have been developed to help patients walk again. Exoskeletons are mechanical devices a person can wear to enhance their physical strength or endurance beyond their normal capability. These exoskeletons have shown themselves to be effective tools for training and rehabilitation of individuals suffering from limited mobility.
However, most exoskeletons are not capable of balancing the user while they walk. In order to maintain balance, the user must hold themselves up with crutches. As with a wheelchair, heavy dependence on crutches can lead to new medical issues for the patient. To solve this problem, technology and techniques created for humanoid robots were used to develop a fully self-balancing exoskeleton. This exoskeleton is known as the Orthotic Lower-body Locomotion Exoskeleton. This thesis details the development of four actuators to power all twelve joints of the exoskeleton. These actuators utilize high-efficiency components, multiple electric motors, and liquid cooling to maintain a small lightweight design and while obtaining very high-power outputs.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/83236 |
| Date | 16 May 2018 |
| Creators | Kendrick, John Thomas |
| Contributors | Mechanical Engineering, Asbeck, Alan T., West, Robert L., Wicks, Alfred L. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.002 seconds