This Master´s thesis deals with heterogeneous photochlorination of polyolefins and especially with the photochlorination of polypropylene itself. In the theoretical part the available information about properties, manufactory and application of chlorinated polyolefins, specifically polyethylene and polypropylene, is provided. The basic principles of the photochemistry are described, which are further applied to the issue of photochemistry chain reactions and photochemical halogenations, mainly photochlorinations. The practical part includes design and realization of few types of equipment for the heterogeneous photochlorination of polypropylene done at low temperatures (to 50° C) by gaseous chlorine in bulk or chlorine suspended in suspension of PP in CCl4. Series of chlorination was accomplished, which was varied in the type of PP, in the way of dosage Cl2 and in the period of high pressure mercury lamp irradiation (1–90 minutes). The chlorine content in prepared samples was determined by the gravimetry with ATR-FTIR spectroscopy, as well as by the Shöniger combustion method. Their accuracies were than compared. The chlorine content dependence on the period of chlorination and on the porosity of initial PP was established.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217048 |
| Date | January 2014 |
| Creators | Kučera, Vladimír |
| Contributors | Tocháček, Jiří, Petrůj, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds