This master’s thesis studies the effect of weathering on thermally modified Norway spruce (Picea abies) and Scots pine (Pinus sylvestris) with different surface treatments. Most importantly colour changes were analysed, especially, the greying. However, other aspects of appearance changes, like cracks, mould and chemical changes on the surface were included. Special emphasis was on analysing the influence of tree species, type of thermal modification and surface treatment on these properties. Furthermore, it was tested if near infra-red (NIR) spectroscopy allows to estimate the colour, in addition, to measuring chemical changes. The whole study was set up as a decking of a gangway in Northern Sweden and evaluated after the first year of exposure. With the help of colorimetry, changes in colour based on the CIE L*C*hab colour space were measured. Test results showed that within one year all surfaces turned greyer significantly due to changes in content of lignin and cellulose measured with NIR spectroscopy. Differences could neither be observed between the uses of the two tree species nor between the uses of the thermal modifications, pressurised saturated steam at a temperature of 180 °C and superheated steam at a temperature of 212 °C. However, the surface treatment affects the colour change. Timber treated with a silicon based treatment had from the beginning a greyer colour and turned greyest after one year, while oil and pigmented oil stain slowed down the greying compared to untreated and iron vitriol treated timber. After one year of exposure for none of the treatments the colour had stabilised. Qualitative analysis of cracks and mould growth on the surface indicated some dependence on thermal modification and surface treatment. The PLS model for the prediction was not good, so no universally valid conclusions could be drawn of them. Timber with silicon based treatment showed a tendency for mould growth and timber thermally modified with pressurised saturated steam at a temperature of 180 °C tends to have cracks more often. It was possible to estimate the colour from NIR spectroscopy. Best estimations were achieved for the Chroma, followed by lightness and hue. Even better prediction of the Chroma could be achieved by fitting different models based on the surface treatments. Hence, NIR spectroscopy allows a good estimation of the greying without needing a further measurement instrument, like a colorimeter.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-71804 |
| Date | January 2018 |
| Creators | Hartwig, Marie |
| Publisher | Luleå tekniska universitet, Träteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0021 seconds