Technology trends such as growing wire delays, power consumption limits, and diminishing clock rate improvements, present conventional instruction set architectures such as RISC, CISC, and VLIW with difficult challenges. To show continued performance growth, future microprocessors must exploit concurrency power efficiently. An important question for any future system is the division of responsibilities between programmer, compiler, and hardware to discover and exploit concurrency.
In this research we develop the first compiler for an Explicit Data Graph Execution (EDGE) architecture and show how to solve the new challenge of compiling to a block-based architecture. In EDGE architectures, the compiler is responsible for partitioning the program into a sequence of structured blocks that logically execute atomically. The EDGE ISA defines the structure of, and the restrictions on, these blocks. The TRIPS prototype processor is an EDGE architecture that employs four restrictions on blocks intended to strike a balance between software and hardware complexity. They are: (1) fixed block sizes (maximum of 128 instructions), (2) restricted number of loads and stores (no more than 32 may issue per block), (3) restricted register accesses (no more than eight reads and eight writes to each of four banks per block), and (4) constant number of block outputs (each block must always generate a constant number of register writes and stores, plus exactly one branch).
The challenges addressed in this thesis are twofold. First, we develop the algorithms and internal representations necessary to support the new structural constraints imposed by the block-based EDGE execution model. This first step provides correct execution and demonstrates the feasibility of EDGE compilers.
Next, we show how to optimize blocks using a dataflow predication model and provide results showing how the compiler is meeting this challenge on the SPEC2000 benchmarks. Using basic blocks as the baseline performance, we show that optimizations utilizing the dataflow predication model achieve up to 64% speedup on SPEC2000 with an average speedup of 31%. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2009-12-626 |
| Date | 19 August 2010 |
| Creators | Smith, Aaron Lee, 1977- |
| Contributors | Burger, Douglas C., Ph. D. |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.0019 seconds