This thesis presents the development of a new method for incorporating station related outages in composite or bulk system reliability analysis. Station related failures can cause multiple component outages that can propagate to other parts of the network resulting in severe damages. In order to minimize the effects of station related outages on the composite system performance it is necessary for the designer to assess their effects. This task can be achieved by including station related outages in the composite system evaluation.
Monte Carlo simulation is used in this research to assess composite system reliability. The new method described in this thesis is used to include station related outages in the reliability evaluation of two composite test systems. This new method is relatively simple and can be used to consider multiple component outages due to station related failures in composite system reliability evaluation. In this approach, the effects of station related outages are combined with the connected terminal failure parameters.
Reliability studies conducted on the two composite test systems demonstrates that station failures significantly affect the system performance. The system reliability can be improved by selecting appropriate station configurations. This is illustrated by application to the two composite test systems.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-10012003-235413 |
| Date | 06 October 2003 |
| Creators | Nighot, Rajesh U |
| Contributors | Saadat Mehr, Aryan, Karki, Rajesh, Gokaraju, Ramakrishna, Billinton, Roy, Torvi, David A. |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-10012003-235413/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0012 seconds