Existing containment models for a loss of coolant accident at many nuclear power plants were created in the 1970s using older computer technology and thermal hydraulic models which were available at that time. While conservative, these models may not present the detail necessary to identify conditions which may be used to produce additional design margin for the plant.
After exploring containment and critical flow modeling, the basis for the use of GOTHIC in this analysis was established. A GOTHIC model was then created to simulate the loss of coolant accident results shown in an Updated Final Safety Analysis Report analysis for the North Anna Power Station. This model was used to examine the effects of increased nodalization in a subcompartment on the existing containment model.
It is shown that adding multidimensional sub-nodes to areas of interest can provide valuable detail which was absent in the UFSAR model. Simulations are able to show the localized pressure spike around a LOCA pipe break that quickly dissipates, leaving significantly lower pressures in what was once an averaged, single, lumped-parameter node. This suggests that additional design margin may exist depending on where the pipe break is assumed to occur. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/50845 |
| Date | 21 May 2013 |
| Creators | McNeil, Wilfred J. IV |
| Contributors | Mechanical Engineering, Pierson, Mark Alan, Tafti, Danesh K., Masterson, Robert E. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds