This thesis is to design an LED driver circuit with constant output current and Power Factor Correction(PFC) control. Switching power converter is applied for power stage of the LED driver circuit, a non-insulated Buck converter without transformer is used, and the inductor current of Buck converter is operating in Continuous Conduction Mode(CCM). According to the operating principle of Buck converter, the equivalent mathematical model and system block diagram is developed to establish the traditional closed loop PFC control circuit. The controller parameters are set up by time-domain and frequency-domain analysis to achieve the goal with constant output current and PFC control. Furthermore, the thesis presents a more effective PFC control method to reduce the cost of multiplier used in traditional PFC control method and overcome the congenital defect of Buck converter. Both two PFC control methods are confirmed and compared by simulation and experiment. The results show that the proposed control method has more effective performance and achieve constant output current for LED with high power factor by 0.966 under full-load condition.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0925109-094015 |
| Date | 25 September 2009 |
| Creators | Liao, Hsuan-yi |
| Contributors | Geeng-kwei Chang, Jerome Chang, Tzuen-lih Chern, I-chih Kao, Yung-chun Wu |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0925109-094015 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0016 seconds