Return to search

A Novel Normal-To-Plane Space Efficient Micro Corner Cube Retroreflector With Improved Fill Factor

A Corner Cube Retro-reflector (CCR) is a device that can be used as transmitters in wireless free space optical communication systems, or remote sensing instruments. A novel approach to fabricate the CCR is developed, where almost 100% of the planar chip area acts as the CCR compared to the maximum of 33% in the prior MEMS CCRs. Unlike the conventional micro machined CCRs that have two planes (mirrors of the CCR) normal to the surface of the wafer, our approach yields all the mirrors within the bulk of the wafer, ensuring very high packing densities and wide acceptance angles. The crystallography of single crystal silicon wafer along with different micromachining and wafer bonding techniques are used to fabricate and assemble the CCR. The solid models of both the active and passive CCRs were built using Coventorware simulation software. In the active CCRs, one of the mirror was electrostatically actuated; this is simulated using the software. The results which show a three fold decrease in the pull-in voltage as compared to surface micromachined cantilevers with the same dimensions as presented. Fabrication of the passive CCR along with various fabrication and assembling processes used are discussed. Experimental results are presented and then discussed.

Identiferoai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-2319
Date07 November 2003
CreatorsAgarwal, Rahul
PublisherScholar Commons
Source SetsUniversity of South Flordia
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceGraduate Theses and Dissertations
Rightsdefault

Page generated in 0.0016 seconds