Many hard drives manufactured today use the Serial ATA (SATA) protocol to communicate with the host machine, typically a PC. SATA is a much faster and much more robust protocol than its predecessor, ATA (also referred to as Parallel ATA or IDE). Many hardware designs, including those using Field-Programmable Gate Arrays (FPGAs), have a need for a long-term storage solution, and a hard drive would be ideal. One such design is the high-speed Data Acquisition System (DAS) created for the NASA Surface Water and Ocean Topography mission. This system utilizes a Xilinx Virtex-4 FPGA. Although the DAS includes a SATA connector for interfacing with a disk, a SATA core is needed to implement the protocol for disk operations.
In this work, an open-source SATA core for Virtex-4 FPGAs has been created. SATA cores for Virtex-5 and Virtex-6 devices were already available, but they are not compatible with the different serial transceivers in the Virtex-4. The core can interface with disks at SATA I or SATA II speeds, and has been shown working at rates up to 180MB/s. It has been successfully integrated into the hardware design of the DAS board so that radar samples can be stored on the disk.
| Identifer | oai:union.ndltd.org:UMASS/oai:scholarworks.umass.edu:theses-2250 |
| Date | 01 January 2013 |
| Creators | Gorman, Cory |
| Publisher | ScholarWorks@UMass Amherst |
| Source Sets | University of Massachusetts, Amherst |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Masters Theses 1911 - February 2014 |
Page generated in 0.0021 seconds