Return to search

Hardware Accelerator for Duo-binary CTC decoding : Algorithm Selection, HW/SW Partitioning and FPGA Implementation

<p>Wireless communication is always struggling with errors in the transmission. The digital data received from the radio channel is often erroneous due to thermal noise and fading. The error rate can be lowered by using higher transmission power or by using an effective error correcting code. Power consumption and limits for electromagnetic radiation are two of the main problems with handheld devices today and an efficient error correcting code will lower the transmission power and therefore also the power consumption of the device. </p><p>Duo-binary CTC is an improvement of the innovative turbo codes presented in 1996 by Berrou and Glavieux and is in use in many of today's standards for radio communication i.e. IEEE 802.16 (WiMAX) and DVB-RSC. This report describes the development of a duo-binary CTC decoder and the different problems that were encountered during the process. These problems include different design issues and algorithm choices during the design.</p><p>An implementation in VHDL has been written for Alteras Stratix II S90 FPGA and a reference-model has been made in Matlab. The model has been used to simulate bit error rates for different implementation alternatives and as bit-true reference for the hardware verification.</p><p>The final result is a duo-binary CTC decoder compatible with Alteras Stratix II designs and a reference model that can be used when simulating the decoder alone or the whole signal processing chain. Some of the features of the hardware are that block sizes, puncture rates and number of iterations are dynamically configured between each block Before synthesis it is possible to choose how many decoders that will work in parallel and how many bits the soft input will be represented in. The circuit has been run in 100 MHz in the lab and that gives a throughput around 50Mbit with four decoders working in parallel. This report describes the implementation, including its development, background and future possibilities.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-7902
Date January 2006
CreatorsBjärmark, Joakim, Strandberg, Marco
PublisherLinköping University, Department of Electrical Engineering, Linköping University, Department of Electrical Engineering, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, text

Page generated in 0.0016 seconds