This thesis explains how to determine and eliminate the causes of quality problems in the production of connectors and small electronic components for the automotive industry. The process of making these components is carried out by use of both high speed and low speed metal stamping presses. There are descriptions of the different designs of editing punches, stamping dies, trimming and molding tools and how unplanned issues can occur during the production process. It addresses all the customer requirements for quality end products, listing the type of material, finishes and technology used for the production of individual components as well as their functionality, durability, and economic impacts. All examples of changes in the design or technology of metal stamping presses are based on many years of practical experience and most of them can be successfully applied in other similar type of instrument production.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241921 |
| Date | January 2016 |
| Creators | Dziuban, Jiří |
| Contributors | Prokop, Jaroslav, Kalivoda, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds