M.Phil. / Linearly chirped fibre Bragg gratings can be used to compensate dispersions in a fibre transmission system. Various methods have been developed to chirp fibre gratings. It is proposed that a uniform period grating can be chirped by applying an axially linear strain gradient. In this project, we shall demonstate a novel method for making chirped fibre Bragg gratings, which involves bonding an unchirped fibre Bragg grating of 5cm length to the surface of a tapered stainless steel plate which is strained by bending or dilating. This allows a strain gradient to be formed along the grating length through the transferring of strains from the plate to the fibre. The profiles of tapered stainless steel plates have been determined by means of the finite element method and computer simulations to establish the strain gradient during loading. Ten conventional resistive strain gauges are also bonded on the other surface for strain measurements. Because of the strain gradient, the local Bragg wavelength is a function of the position along the length of the fibre grating so that the grating chirp is an automatic consequence of the strain gradient. This method provides the dynamic control of Bragg wavelength shift, peak reflectivity and spectral bandwidth, and its tunability is also suitable for optimising pulse compression and optical fibre dispersion compensation. Using couple-mode equations, we have also calculated the reflection response of a chirped fibre grating. It is shown that the close agreement between the theoretical and the experimental results suggests that the strain gradient technique provides good control of the Bragg grating chirp and the center wavelength of a chirped fibre Bragg grating.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:9621 |
| Date | 05 September 2012 |
| Creators | Zhu, Yinian |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0018 seconds