Return to search

Direktsamplande digital transciever / Direct sampling digital transceiver

<p>Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds. Subsampling add extra noise, because of that an A/D-converter based on the RSD algorithm was chosen to improve error rate. To achieve high bit-processing rate compared to the used number of transistors, pipeline structure were selected as conversion method. The receiver was that part which gained largest attention because it’s the part which is most interesting to optimise. A/D-conversion is more difficult to construct than D/A conversion, besides there’s more to gain from eliminating mixers in the receiver than in the transmitter.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-1658
Date January 2002
CreatorsKarlsson, Magnus
PublisherLinköping University, Department of Science and Technology, Institutionen för teknik och naturvetenskap
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, text

Page generated in 0.0054 seconds