Return to search

Redundant Number Systems for Optimising Digital Signal Processing Performance in Field Programmable Gate Array

Speeding up addition is the key to faster digital signal processing (DSP). This can be achieved by exploiting the properties of redundant number systems. Their expanded symbol (digit) alphabet gives them multiple representations for most values. Utilising redundant representations at the output of an adder permits addition to be performed without carry-propagation, yielding fast, constant time performance irrespective of the word length. A resource efficient implementation of this fast adder structure is developed that re-purposes the fast carry logic of low-cost field programmable gate arrays (FPGAs). Experiments confirm constant time addition and show that it outperforms binary ripple carry addition at word lengths of greater than 44 bits in a Xilinx Spartan 3 FPGA and 24 bits in an Altera Cyclone III FPGA.

Redundancy also provides other properties that can be exploited for performance gain. Some redundant representations will have more zero-symbols than others. These maximise the opportunities to exploit the multiplicative absorbing and additive identity properties of zero that when exercised reduce superfluous calculations. A serial recoding algorithm is developed that generates a redundant representation for a specified value with as few nonzero symbols as possible. Unlike previously published methods, it accepts a wide specification of number systems including those with irregularly spaced symbol alphabets. A Markov analysis and analysis of the elementary cycles in the formulated state machine provides average and worst case measures for the tested number system. Typically, the average number of non-zero symbols is less than a third and the worst case is less than a half.

Further to the increase in zero-symbols, zero-dominance is proposed as a new property of redundant number representations. It promotes a set of representations that have uniquely positioned zero-symbols, in a Pareto-optimal sense. This set covers all representations of a value and is used to select representations to optimise the calculation of a dot-product.

The dot-product or vector-multiply is a fundamental operation in DSP, since it is employed in filtering, correlation and convolution. The nonzero partial products can be packed together, substantially reducing the calculation time. The application of redundant number systems provides a two-fold benefit. Firstly, the number of nonzero partial products is reduced. Secondly, a novel opportunity is identified to use the representations in the zero-dominant set to optimise the packing further, gaining an extra 18% improvement.
An implementation of the proposed dot-product with partial product packing is developed for a Cyclone II FPGA. It outperforms a quad-multiplier binary implementation in throughput by 50% .

Redundant number systems excel at increasing performance in particular DSP subsystems, those that are numerically intensive and consist of considerable accumulation. The conversion back to a binary result is the performance bottleneck in the DSP algorithm, taking a time proportional to a binary adder. Therefore, redundant number systems are best utilised when this conversion cost can be amortised over many fast redundant additions, which is typical in many DSP and communications applications.

Identiferoai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/4623
Date January 2010
CreatorsKamp, William Hermanus Michael
PublisherUniversity of Canterbury. Electrical and Computer Engineering
Source SetsUniversity of Canterbury
LanguageEnglish
Detected LanguageEnglish
TypeElectronic thesis or dissertation, Text
RightsCopyright William Hermanus Michael Kamp, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml
RelationNZCU

Page generated in 0.0024 seconds