The Diploma thesis describes the design, manufacture and testing of a universal automation machine for church bells. The research section summarizes the bell, way of use and properties. The drives and their starting and power switching characteristic are analyzed. The chain drive based on the selected engine and the whole assembly is designed and tested by using PLC. Unique controller based on a modular design was designed. Sensors based on magnetic rotary encoder were also created for this unit. The entire circuit was tested on three evangelical church bells in the town Klobouky u Brna.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230627 |
| Date | January 2013 |
| Creators | Zajíc, Jiří |
| Contributors | Březina, Lukáš, Krejsa, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds