Return to search

Verification and validation of the implementation of an Algebraic Reynolds-Stress Model for stratified boundary layers

This thesis studies the implementation of an Explicit Algebraic Reynolds-Stress Model(EARSM) for Atmospheric Boundary Layer (ABL) in an open source ComputationalFluid Dynamics (CFD) software, OpenFOAM, following the guidance provided by thewind company ENERCON that aims to make use of this novel model to improvesites’ wind-field predictions. After carefully implementing the model in OpenFOAM,the EARSM implementation is verified and validated by testing it with a stratifiedCouette flow case. The former was done by feeding mean flow properties, takenfrom OpenFOAM, in a python tool containing the full EARSM system of equationsand constants, and comparing the resulting flux profiles with the ones extracted bythe OpenFOAM simulations. Subsequently, the latter was done by comparing theprofiles of the two universal functions used by Monin-Obukhov Similarity Theory(MOST) for mean velocity and temperature to the results obtained by Želi et al. intheir study of the EARSM applied to a single column ABL, in “Modelling of stably-stratified, convective and transitional atmospheric boundary layers using the explicitalgebraic Reynolds-stress model” (2021). The verification of the model showed minordifferences between the flux profiles from the python tool and OpenFOAM thus, themodel’s implementation was deemed verified, while the validation step showed nodifference in the unstable and neutral stratification cases, but a significant discrepancyfor stably stratified flow. Nonetheless, the reason behind the inconsistency is believedto be related to the choice of boundary conditions thus, the model’s implementationitself is considered validated. Finally, the comparison between the EARSM and the k − ε model showed thatthe former is able to capture the physics of the flow properties where the latter failsto. In particular, the diagonal momentum fluxes resulting from the EARSM reflectthe observed behaviour of being different from each other, becoming isotropic withaltitude in the case of unstable stratification, and having magnitude u′u′ > v′v′ > w′w′ for stably stratified flows. On the other hand, the eddy viscosity assumption used bythe k − ε model computes the diagonal momentum fluxes as being equal to each other.Moreover, the EARSM captures more than one non-zero heat flux component in theCouette flow case, which has been observed to be the case in literature, while the eddydiffusivity assumption used by the k − ε model only accounts for one non-zero heat fluxcomponent.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-320730
Date January 2022
CreatorsFormichetti, Martina
PublisherKTH, Teknisk mekanik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTRITA-SCI-GRU ; 2022:258

Page generated in 0.0021 seconds