Presented are approximate finite strip methods for use in predicting elastic buckling strength of cold-formed steel columns. These methods were developed by examining elemental behavior of cross-sections in eigen-buckling analyses and validated using a large database of finite element rack-type columns with perforation patterns. The influence of perforations is accounted by reduced thicknesses related to the plate buckling coefficient and transverse web rotational stiffness in the prediction of local and distortional buckling respectively. Global buckling prediction including the influence of perforations uses critical elastic loads of an unperforated section multiplied by the ratio of weighted to gross cross-sectional moment of inertia for flexural buckling and the ratios of weighted to gross cross-sectional warping torsion constant and weighted to gross St. Venant torsional constant for flexural-torsional buckling. Concern for end-user was given and methods are presented in a way for incorporation into governing design standards. Data to support these findings are available at http://hdl.handle.net/10919/23797 / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/23680 |
| Date | 02 August 2013 |
| Creators | Smith, Frank Harrison |
| Contributors | Civil and Environmental Engineering, Moen, Cristopher D., Eatherton, Matthew R., Wright, William J. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/octet-stream |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | http://hdl.handle.net/10919/23797 |
Page generated in 0.2566 seconds