The objective of this study is to investigate the technique of the PWS (Post-Weld-Shift) measurement in cylindrical-type laser diode module packaging processes. Including measure the shift in focus plane and the run-out between the axis of laser diode and optical fiber. The objective of this technique is to quantify the PWS in packaging processes. This technique can improve the efficient of the laser hammering technique.
The measurement technique developed in this study employs a laser displacement meter (Keyence LC-2430) to measure the profile and position the upper housing of laser diode module. Using the concepts of ellipse and symmetric figure, the Ellipse Fitting Method (EFM) and the Symmetric Center Method (SCM) are developed. A simulation program is coded for discussing the relationship between the measurement error and the roundness of the optical fiber housing. Finally, these measuring technique are applied on the laser diode module packaging system (Newport-LW4000) to measure the PWS. The experimental measuring data of PWS is 3.5£gm, which is reasonable in compare to the estimate alignment offset (2.9£gm to 5.9£gm) by the coupling efficiency method. Therefore it is believed that the technique developed in this study is feasible and practical.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0712104-161501 |
| Date | 12 July 2004 |
| Creators | He, Yue-Lin |
| Contributors | Ying-Chien Tsai, Jao-Hwa Kuang, Der-Min Tsay, Wood-Hi Cheng |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0712104-161501 |
| Rights | withheld, Copyright information available at source archive |
Page generated in 0.0017 seconds