Return to search

[en] EMISSIONS OF POLLUTANTS FROM INTERNAL COMBUSTION ENGINES USING ETHANOL AND GASOLINE AS FUEL: MEASURES AND CALCULATION METHODS / [pt] EMISSÕES DE POLUENTES POR MOTORES DE COMBUSTÃO INTERNA UTILIZANDO ETANOL HIDRATADO E GASOLINA COMO COMBUSTÍVEIS: MEDIDAS E MÉTODOS DE CÁLCULO

[pt] O impacto ambiental causado pela queima de combustíveis por veículos automotivos, atualmente, atua como restrição na especificação de parâmetros de projetos de motores em vários Países.
O uso de etanol hidratado no Brasil criou a necessidade de determinar o comportamento das emissões de poluentes sob condições típicas de projeto, auxiliando o estabelecimento de uma política de controle de poluição. Nesta pesquisa, as emissões de um motor monocilíndrico foram medidas, basicamente óxido nítrico, monóxido de carbono e aldeídos. Usou-se gasolina comercial e etanol hidratado como combustíveis. A influencia da taxa de compressão, da relação combustível-ar e da quantidade de água no etanol, na performance do motor e no comportamento das emissões de acetaldeído foi desenvolvido para cálculos em computador digital, concordando bem com os resultados experimentais. Usando este modelo, valores de emissões de poluentes por motores de combustão interna, usando etanol hidratado foram calculados, mostrando uma tendência bem definida que pode ser útil para políticas de controle de poluição. / [en] The impact on the environment caused by the burning of fuels from automotive vehicles, nowadays, acts as a restriction on the specification of the engine designe parameters in several countries. The use of ethyl acohol-ewater blends in Brazil has created the necessity of determining the pollutant emission pattern under typical design operating conditions aiming the stablishment of a pollution control policy. In this research, emissions from a monocylinder engine were measured, bassicaly ntric oxide, carbon monoxide and aldehydes. The engine was fueled with commercial gasoline and ethyl alcohol-water blends. The influence of the compression ratio, air-fuel ratio and water content of blens, on the perfomance of the engine and pollutant pattern was studied. A Kinetic model, taking into account CO and NO formations mechanisms, as well as acetaldehyde emissions was developed for digital computer calculations, matching the experimental results to the calculated ones. The, using this model, values of the pollutant emissions from internal combustion engines, fueled with ethyl alcohol-water blends were calculated showing a very well defined trend, which can be useful for pollution control policies.

Identiferoai:union.ndltd.org:puc-rio.br/oai:MAXWELL.puc-rio.br:18462
Date10 October 2011
CreatorsROGÉRIO SILVEIRA DE QUEIRÓZ
ContributorsALCIR DE FARO ORLANDO
PublisherMAXWELL
Source SetsPUC Rio
LanguagePortuguese
Detected LanguagePortuguese
TypeTEXTO

Page generated in 0.0018 seconds