Return to search

Sputtered Pb(Zr₀.₅₂Ti₀.₄₈)O₃ (PZT) thin films on copper foil substrates / Sputtered Pb(Zr0.52Ti0.48)O3 (PZT) thin films on copper foil substrates

Pb(Zr₀.₅₂Ti₀.₄₈)O₃ (PZT) thin films are of interest for their large dielectric permittivity, ferroelectric, and piezoelectric properties. The material has been widely studied for use in high frequency transducers, multi-layered capacitors, and ferroelectric random access memory. Copper foils are an inexpensive, flexible substrate with a low resistivity which makes them ideal for many transducer and capacitor applications. PZT thin films on copper foils were produced by RF sputtering and crystallized under reducing conditions. Causes and prevention of a cuprous oxide interlayer are discussed. The film structure was characterized by XRD, SEM, and AFM. The permittivity was low, but remanent polarization increased to as high as ~40 μC/cm² as film thickness and crystallization temperature increased. Residual stresses were measured by x-ray diffraction using the sin²ψ method. The relative permittivity of the PZT/Cu films was measured as a function of applied AC electric field. By performing a Rayleigh analysis on this data one can determine the relative contributions of the intrinsic, reversible, and irreversible components to the permittivity. The residual stress could be correlated to the reversible part of the permittivity. The first order reversal curves (FORCs), which characterize the ferroelectric switching, give indications of the defect state of the film. Cantilever energy harvesters were fabricated. Large electrodes were able to be evaporated onto the films after oxidizing pinholes and cracks on a hot plate. Devices were tested on a shaker table at < 100 Hz. A dynamic model based on Euler-Bernoulli beam equations was used to predict power output of the fabricated devices. The observed output was comparable to model predictions. Resonant frequency calculations were in line with observed first and second resonances at ~17 Hz and ~35 Hz which were also close to those predicted by the dynamic model. / Graduation date: 2013

Identiferoai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/36401
Date20 December 2012
CreatorsWalenza-Slabe, Joel
ContributorsGibbons, Brady J.
Source SetsOregon State University
Languageen_US
Detected LanguageEnglish
TypeThesis/Dissertation

Page generated in 0.0023 seconds