One of the most sustainable pathways of sewage sludge treatment in recent years has been thermal conversion. The benefits of thermal treatment of sewage sludge are the recovery of energy or valuable chemical products, the destruction of harmful organic compounds, the separation of heavy metals from the P-rich coarse ash fraction, and the decreased and sanitized ash volume. The ashes created by these thermal conversion processes of sewage sludge are often rich in P that is mostly present in minerals with low plant-availability such as apatite. Due to the enrichment of P in the created ashes, a variety of post-processing steps have been developed to recover P from sewage sludge ashes. One proven way for the sus-tainable recovery of P from such ashes is thermal post-processing with alkaline salts, e.g., Na2SO4 or K2CO3, which was able to transform less plant-available phosphates in the sewage sludge into more plant-available alkali-bearing phos-phates. Based on these results, one could facilitate creating these phosphates with enhanced plant-availability by providing the chemical potential to form them already during the thermal conversion process of sewage sludge. This thesis aims to increase the current knowledge about the ash transformation processes of P and to suggest suitable process parameters for the alteration of the phosphate speciation in sewage sludge ashes by co-conversion with alkaline-rich agricultural residues. More specifically, the possibility of incorporating K derived from agricultural residues in phosphate structures derived from sewage sludge was evaluated with respect to the influence of the process temperature, the conver-sion atmosphere, and the fuel mixture. The studied parameters were chosen to generate knowledge relevant for fluidized bed gasification processes, with a spe-cial focus on dual fluidized bed (DFB) gasification systems. The applicability of feldspar bed materials in fluidized bed gasification systems was investigated to enable the substitution of the commonly used olivine, which often contains heavy metals (potentially contaminating recovered ashes), and quartz, which is very reactive towards fuel-derived K and potentially leads to bed material fragmentation and bed agglomeration (Paper I & II). Subsequently, the thermodynamic potential for the alteration of the P-species in sewage sludge ash during co-combustion and co-gasification processes with agricultural residues was investigated (Paper III). Thereafter, an experimental evaluation of the ash transformation chemistry in thermal conversion processes of sewage sludge with different types of alkali-rich agricultural residues in temperatures relevant for flu-idized bed technology was conducted (Paper IV & V). The methodology employed was chosen with respect to the state of technology of the specific investigated process. Paper I & II applied SEM, EDS, XRD, and thermodynamic equilibrium modeling for bed material samples derived from an industrial indirect gasifier. Paper III applied thermodynamic equilibrium calcula-tions to theoretically evaluate ash compositions resulting from co-conversion of sewage sludge and agricultural residues. Paper IV & V employed SEM, EDS, ICP-AES/MS, XRD, and thermochemical modeling on ash samples derived from single pellet lab-scale experiments. The results obtained by analysis of bed material from indirect wood gasification showed the difference in interaction mechanism for K-feldspar and Na-feldspar, most notably the enhanced disintegration of Na-feldspar by K originating from the fuel (Paper I & II). Thermodynamic models employed for fuel mixtures of sewage sludge and agricultural residues showed the thermodynamic preference for the formation of the desired alkali-bearing phosphates (Paper III). Experi-ments conducted with these fuel mixtures (Paper IV & V) supported the theo-retical findings, and the influence of temperature and process conditions could be obtained. However, practical investigations also showed that attainment of the desired ash composition is subject to significant restrictions. Derived from the elaborated results and discussions, it was possible to assess the critical process and fuel parameters for the development of up-scaled gasification processes focusing on the conversion of sewage sludge with the aim of creating improved phosphate formation in the ash. The selection of a suitable bed material in fluidized bed conversion and the transformation mechanisms defining the ash chemistry were found to be of vital importance for future applications. The pur-suit of the predefined aims in reference to P-recovery from sewage sludge has led to a multitude of suggestions for suitable process parameters that must be ad-dressed in future bench- and pilot-scale experimental runs.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-81024 |
| Date | January 2020 |
| Creators | Hannl, Thomas Karl |
| Publisher | Luleå tekniska universitet, Energivetenskap, Luleå |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Licentiate thesis / Luleå University of Technology, 1402-1757 |
Page generated in 0.0025 seconds