Return to search

Development of convective reflow-projection moire warpage measurement system and prediction of solder bump reliability on board assemblies affected by warpage

Out-of-plane displacement (warpage) is one of the major thermomechanical reliability concerns for board-level electronic packaging. Printed wiring board (PWB) and component warpage results from CTE mismatch among the materials that make up the PWB assembly (PWBA). Warpage occurring during surface-mount assembly reflow processes and normal operations may cause serious reliability problems. In this research, a convective reflow and projection moire warpage measurement system was developed. The system is the first real-time, non-contact, and full-field measurement system capable of measuring PWB/PWBA/chip package warpage with the projection moire technique during different thermal reflow processes.

In order to accurately simulate the reflow process and to achieve the ideal heating rate, a convective heating system was designed and integrated with the projection moire system. An advanced feedback controller was implemented to obtain the optimum heating responses. The developed system has the advantages of simulating different types of reflow processes, and reducing the temperature gradients through the PWBA thickness to ensure that the projection moire system can provide more accurate measurements.

Automatic package detection and segmentation algorithms were developed for the projection moire system. The algorithms are used for automatic segmentation of the PWB and assembled packages so that the warpage of the PWB and chip packages can be determined individually.

The effect of initial PWB warpage on the fatigue reliability of solder bumps on board assemblies was investigated using finite element modeling (FEM) and the projection moire system. The 3-D models of PWBAs with varying board warpage were used to estimate the solder bump fatigue life for different chip packages mounted on PWBs. The simulation results were validated and correlated with the experimental results obtained using the projection moire system and accelerated thermal cycling tests. Design of experiments and an advanced prediction model were generated to predict solder bump fatigue life based on the initial PWB warpage, package dimensions and locations, and solder bump materials. This study led to a better understanding of the correlation between PWB warpage and solder bump thermomechanical reliability on board assemblies.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/22600
Date05 March 2008
CreatorsTan, Wei
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Detected LanguageEnglish
TypeDissertation

Page generated in 0.0018 seconds