A residential micro-cogeneration system based on a Stirling engine unit was modified to operate with wood derived fast pyrolysis liquid (bio-oil)-ethanol blend. A pilot stabilized swirl combustion chamber was designed to replace the original evaporative burner due to bio-oil’s nondistillable nature. This also required modifications of the engine’s control systems. Efficiencies for the bio-oil/ethanol blend were found be higher than those of diesel due to the higher heat loss incurred with diesel. Based on a modified efficiency, which disregarded the heat loss through the combustion chamber, power efficiencies were found to be comparable. The maximum time of operation with the bio-oil/ethanol blend was approximately 97 minutes due to the clogging of the narrow passages. Carbon monoxide emissions were higher for the bio-oil/ethanol blend due to the operation conditions of the combustion chamber. Oxides of nitrogen emissions were also higher for the bio-oil/ethanol blend due to its inherent nitrogen content.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/33268 |
| Date | 20 November 2012 |
| Creators | Khan, Umer |
| Contributors | Thomson, Murray J. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds