Return to search

HYDRATE PLUG FORMATION PREDICTION TOOL – AN INCREASING NEED FOR FLOW ASSURANCE IN THE OIL INDUSTRY

Hydrate plugging of hydrocarbon production conduits can cause large operational
problems resulting in considerable economical losses. Modeling capabilities to predict
hydrate plugging occurrences would help to improve facility design and operation in
order to reduce the extent of such events. It would also contribute to a more effective
and safer remediation process. This paper systematically describes different operational
scenarios where hydrate plugging might occur and how a hydrate plug formation
prediction tool would be beneficial.
The current understanding of the mechanisms for hydrate formation, agglomeration and
plugging of a pipeline are also presented. The results from this survey combined with the
identified industrial needs are then used as a basis for the assessment of the capabilities
of an existing hydrate plug formation model, called CSMHyK (The Colorado School of
Mines Hydrate Kinetic Model). This has recently been implemented in the transient
multiphase flow simulator OLGA as a separate module.
Finally, examples using the current model in several operational scenarios are shown to
illustrate some of its important capabilities. The results from these examples and the
operational scenarios analysis are then used to discuss the future development needs of
the CSMHyK model.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:BVAU.2429/1149
Date07 1900
CreatorsKinnari, Keijo, Labes-Carrier, Catherine, Lunde, Knud, Hemmingsen, Pål V., Davies, Simon R., Boxall, John A., Koh, Carolyn A., Sloan, E. Dendy
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
Typetext
RightsKinnari, Keijo; Hemmingsen, Pål; Sloan, E. Dendy; Koh, Carolyn A.

Page generated in 0.0018 seconds