This thesis deals with the evaluation of emissions of NOx and CO formed during the combustion process when the burner utilizing fuel staging and internal flue gas recirculation is used. In the theoretical part the NOx formation mechanisms and methods used to suppress their formation are described. This is followed with the currently valid legislation in the Czech Republic in terms of the emission limits for NOx and CO in stationary sources. In the work, combustion tests were performed at the burners testing facility at UPEI BUT. The tests revealed that the most important parameters, which influence the NOx formation, are fuel staging, increasing combustion air excess and the utilization of new equipment that induces the flue gas to be drawn back into the burner. The equipment is installed in the burner’s air channel. The dependence of flue gas temperature, heat flux to the combustion chamber’s section walls and in-flame temperatures distribution in the horizontal symmetry plane of the combustion chamber on various parameters were investigated. The parameters included the geometry of the equipment for flue gas recirculation, primary/secondary ratio, geometry of nozzles for secondary fuel supply, tangential orientation of these nozzles towards the burner axis, and the excess of combustion air.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:232140 |
| Date | January 2015 |
| Creators | Macenauerová, Tereza |
| Contributors | Skryja, Pavel, Bělohradský, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0071 seconds