Friction stir process (FSP) was employed to investigate the grain evolution of AA1050 aluminum alloy in this study. The rotation speeds for the tool were set from 500 to 2000 rpm with a constant traverse speed of 0.5mm/s. The temperature under pin was measured by K-type thermocouple imbedded under the pin. Grain sizes were determined by scanning electron microscopy.
The maximum temperature at the bottom of pin increased with the increasing of rotation speed but not exceeding 0.8Tm. Grain size at center and bottom of stirred zone was in linear increase at low rotation speed, but increased a little at high rotation speed (>1000rpm). The grain size grew rapidly into a stable size in a 2mm distance measured from the passing of pin. When rotation speed is above 1000rpm, average grain growth rate is 1£gm/s. When rotation speed is lower than 700rpm, average grain growth rate is slower than 0.2£gm/s. BEI/ECCI observations revealed that grains in SZ became equaxied.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0425107-162415 |
| Date | 25 April 2007 |
| Creators | Chen, Yu-Lung |
| Contributors | Ho, New-Jin, Kao Po-We, Huang, J.Chih-Ching |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0425107-162415 |
| Rights | withheld, Copyright information available at source archive |
Page generated in 0.002 seconds