Coal can be converted to different chemical products through processes such destructive
distillation. The destructive distillation of coal yields coke as the main product with byproducts
such as coal tar pitch (CTP). CTP has a wide range of applications, especially in the
carbon-processing industries. Typical applications include the manufacture of anodes used in
many electrochemical processes, as well as Söderberg electrodes used in different ferroalloy
processes. Söderberg electrodes are made from the thermal treatment of Söderberg electrode
paste. The Söderberg electrode paste is a mixture of CTP (binding material) and
coke/calcined anthracite (filler). Söderberg electrodes are characterised by a baking isotherm
temperature. This temperature is located in the baking zone of the Söderberg electrode
system. In the baking zone, the liquid paste is transformed into a solid carbonaceous material.
Knowing the baking isotherm temperature is essential as it will ensure the safe, profitable and
continuous operation of submerged arc furnaces. Thermomechanical analysis (TMA) was
used in this study to determine the baking isotherm temperature of CTP samples. The baking
isotherm temperature for all samples was found to lie between 450 and 475 °C irrespective of
the initial chemical and physical composition of the CTP. TMA was also used to measure the
dimensional changes that take place in the binding material (CTP) at temperatures above the
baking isotherm. The dimensional changes of 12 CTP samples when heated from room
temperature up to a maximum of 1300 °C were measured. The results indicated that all CTP
samples shrank by approximately 14% in the first heating and cooling cycle. The second and
third heating and cooling cycles gave a small change in dimensions of approximately 2% for
all samples. The significant change in dimensions observed for all CTP samples during the
first TMA thermal treatment cycle was attributed to the structural rearrangement that takes
place within the carbonaceous material. The structural ordering of all CTP samples thermally
treated was evaluated by X-ray diffractometry (XRD). XRD is widely used in the determination of crystallinity/amorphousness of carbonaceous materials, interlayer distance
(d-spacing), as well as the degree of ordering (DOG) in a given material. For comparison of
structural ordering, XRD analysis was also performed on raw (as-received) CTPs, as well as
CTPs thermally treated at 475 and 1300 °C. Prebaked electrode graphite was also analysed.
From the XRD results, raw CTP was found to be amorphous with no significant ordering.
The interlayer spacing (d002) for all raw CTP samples averaged 3.70 Å, compared to 3.37 Å
for prebaked electrode graphite. CTPs thermally treated at 1300 °C had a d-spacing of 3.51
Å. The DOG of raw samples was found to be negative which was indicative of the
amorphousness of the raw CTP. The DOG increased with an increase in thermal treatment
temperature, as was seen from the DOG of CTPs thermally treated at 1300 °C, which was
calculated to be approximately -81% for all 12 samples. The calculated DOG for prebaked
electrode graphite was 81%.
Prior to determining the baking isotherm temperature, as well as the changes in dimensions
during thermal treatment, the chemical compositions of the 12 CTP samples were
determined. In the chemical composition determination, fundamental properties such as
softening point (SP), coking value (CV), toluene and quinoline insolubles (TI and QI,
respectively) were evaluated. This was in addition to proximate and ultimate analysis. The
information obtained from this diverse characterisation showed significant differences in the
chemical composition of the 12 CTPs. By making use of multi-linear regression analysis
(MLR), it was possible to predict or calculate less commonly determined characteristics (CV,
TI and QI) from the more commonly obtained parameters (proximate and ultimate analysis
parameters). It was found that MLR could be used successfully to calculate CV and TI, but
less so for QI. Additional chemical composition of CTP was determined by analytical techniques such as
Fourier Transform Infra-Red spectroscopy (FT-IR) and Nuclear Magnetic Resonance
spectroscopy (NMR). Results from the FT-IR analysis showed that the spectra for all 12 raw
CTPs were similar, with differences only being in the FT-IR band intensities. The differences
in FT-IR band intensities were supported by NMR analysis data, which gave quantitative
information on the different structural parameters found in all CTPs. The structural
composition of CTPs changed during thermal treatment, as was shown by the FT-IR analysis
performed on raw CTPs samples, CTPs thermally treated at 475, 700, 1000 and 1300 °C, as
well as prebaked electrode graphite. / PhD (Chemistry), North-West University, Potchefstroom Campus, 2014
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nwu/oai:dspace.nwu.ac.za:10394/12261 |
| Date | January 2014 |
| Creators | Shoko, Lay |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds