Purpose Conventional arm-prosthesis are expensive to make and therefore limit the availability for users on the geographical locations there the user pays for it. This study compares the hand function of a 3D-printed prosthesis with lower production cost with a traditional prosthesis. Method A test person performed two different tests of hand function (Box and Block test and Nine-hole peg test) with a myoelectric trans radial prosthetic arm and a body powered 3D printed trans radial prosthetic arm. The test person also answered two parts of the orthotics and prosthetics users’ survey (OPUS) considering both prosthetic arms. Result The 3D-printed prosthesis performed worse than the traditional prosthesis in the two tests of hand function and generally worse in the questionnaire about the function of the prosthesis. Though it got higher values in comfort and affordability. Conclusion There was a significant difference in function between the 3D-printed prosthesis and the myoelectric prosthesis but the printed prosthesis could perform many activities in daily living. Whether the 3D-printed prosthetic device is priceworthy or not is hard to measure because of different criteria, therefore a conclusion is hard to reach.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hj-44578 |
| Date | January 2019 |
| Creators | Broman, Adam, Blom, Gustav |
| Publisher | Hälsohögskolan, Högskolan i Jönköping, HHJ, Avd. för rehabilitering, Hälsohögskolan, Högskolan i Jönköping, HHJ, Avd. för rehabilitering |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0019 seconds