The thesis deals with headstock and spindle of the universal turning center. In the introduction part is a destription of the headstock morfology. It describe how the spindle and headstock can be solved in terms of its bearing, installation, used clamping interface, lubrrication, cooling and sealing. The second part is devoted to the universals turning machines which are available on the market. In the final part is the practical solution of the headstock and spindle on which can be performed for milling and drilling operation instead of turning.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402636 |
| Date | January 2019 |
| Creators | Suda, Martin |
| Contributors | Novotný, Lubomír, Dokoupil, Vladimír |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds