The thesis contains of draft, calculations, CAD model and drawing documentation of the moltifunctional machining center with horizontal axis of spindle. This thesis is one of the four parts with which connection ensue the machine-tool. In the first part of my work, there is a constructional draft of the headstock which will enable milling, turning and drilling. In the introduction of this part is headstock research which is solving the most important parts of the headstock of machine . Consequently, technical calculations are acoomplished. Based on these calculations, a specific constructional draft of the headstock is crafted. In the next part of my work, I do research in the area of removable paring milling heads. After this part, there are technical calculations and the specific constructional draft. In the entire work, there is emphasis put on simplicity and functionality.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:402637 |
| Date | January 2019 |
| Creators | Vazovan, Ľubomír |
| Contributors | Marek, Tomáš, Marek, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Slovak |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds