The thesis is dedicated to welding combination of titanium alloy Ti-6Al-4V and austenitic steels 1.4301 by electron beam. Based on literature studies of bonding titanium and its alloys with steels, it was proposed to select for welding interlayer of copper, which could limit the impact of intermetallic phases on the mechanical properties of the weld seam and enable the creation of weld. For welding the pipe samples were used three methods of welding with various welding parameters. Samples which remain after thermal cycling vacuum-tight, were then further analyzed (micro-hardness, tensile test, etc.).
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:241156 |
Date | January 2016 |
Creators | Skalka, Jan |
Contributors | Dupák, Libor, Mrňa, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.022 seconds