Stability and sustainability of operation of interconnected power converter systems has been an important focus of study in the field of power electronics and power systems. With ever-increasing application of electrical machines by means of electrification of vehicles, airplanes and shipboards, detailed study of the relating dynamics is very important to ensure the proper implementation and stable behavior of the overall system. In this work, the application of the black box approach study of the power converters has been expanded to the electrical machines. Using this modeling method, it is possible of have accurate behavior of electrical and mechanical terminals of the machine without the detailed information about the internal structure of the machine, material characteristics or topology of the machine. Instead, accurate model of electrical and mechanical terminals of the machine are achieved by measuring specific frequency responses of the machine to distinguish dynamic relation of the various electrical and mechanical quantities of the machine. The directly measured frequency responses, are coupled with the dynamics of the source and load in the electrical and mechanical terminals of the machine thus in order to decoupled the described couplings a mathematical process is used that results in decoupling of the controller and drive on the electrical side and the dynamics of the mechanical load and mechanical shaft at the mechanical terminal of the machine. Resulting model is the linear time invariant representation of the electrical machine at a specific operating point. Additionally, this work represents the application of this modeling method for accurate measurement of internal parameters of the machine such as inductances and mechanical inertia and characterization of the mechanical shaft coupler. Resulting unterminated model of the machine is a very important matter of information for system integrators and electrical and mechanical designs related to the application of the machine, to ensure the stable and sustainable operation of the machine. This work for the first time, represents the experimental implementation of this terminal behavioral modeling method for studying electrical machines as well as describes some of the practical limitations of this methodology. By incorporating and integrating a combination of commercially available devices such as frequency response analyzer, Hardware-In-The-Loop (HIL), Power-Hardware-In-The-Loop (PHIL), a test setup has been developed that is capable of control, operate and study arbitrary frame small-signal related measurements required for terminal behavioral study of the electrical machines. Resulting model of the machine that has been extracted from this modeling method is then used to compare in time domain with the real machine in the case of transient change in the mechanical load on the shaft to discover the validity of this modeling procedure. / Master of Science / According to the data from the International Energy Agency, around half of the electricity used globally is consumed by electric motors. Moreover, the growth in the electrical vehicle industry will increase their application even further, hence the development of high-fidelity models of electric machines for real-time emulation, system-level analyses, and stability studies still stands out as an important and needed research focus. New modeling concepts that go beyond the standard industry practice can be used at the design and integration stage to ensure the stable behavior of the overall system. Furthermore, convenient testing and identification pressures can help ensure the long-term operation of the system. Aligned with this trend, this thesis is studying permanent magnet synchronous machines (PMSM) using small-signal terminal-behavioral three-port networks. Having such a behavioral model of the machine available provides many opportunities for system integrators, and even enables an in-situ system observation and stability assessment at both the machine's electrical and mechanical interfaces. This capability can undoubtedly be of high importance in practice, as it is offering new insights into dynamic interactions of the electro-mechanical systems, the governor or turbine control design in ships, aircrafts, electrical vehicles, and even large synchronous machines in power plants. A so-called characterization testbed has been built that combines Hardware-In-The-Loop (HIL) and Power-Hardware-In-The-Loop (PHIL) environments, with sensor-interface boards that are used to properly scale measured signals for machine control. The Frequency-Response-Analyzer is used to sweep the proper electrical or mechanical terminal of the machine by perturbing the proper control signal within the machine controller running in PHIL and reading d-q currents, voltages, torque, and speed variables whose dynamic ratios are then obtained without the need for interrupting the normal operation of the electrical machine. The capability of acquiring such a detailed model of the machine while the machine is in operation is an important benefit of this modeling method, in comparison to the conventional identification methods widely applied in the industry. The resulting model is a linearized time invariant representation of the electrical machine at a specific operating point of interest, and can be used by system integrators to ensure the stability of the system using well known stability assessment methodologies. Furthermore, this modeling strategy has been experimentally verified for the first time on electrical machines, and the resulting model has been compared with the transient behavior of the machine in the presence of a step change in the mechanical load of the machine.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/111945 |
| Date | 20 September 2022 |
| Creators | Nazari, Arash |
| Contributors | Electrical Engineering, Boroyevich, Dushan, Cvetkovic, Igor, Belkhayat, Mohamed |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International, http://creativecommons.org/licenses/by-nc-nd/4.0/ |
Page generated in 0.0065 seconds