The need for high speed and cost efficient inspection in manufacturing lineshas led to a vast usage of camera-based vision systems. The performance ofthese systems is sufficient to determine shape and size, but hardly to an accuracylevel comparable with traditional metrology tools. To achieve highprecision shape/position/defect measurements, the camera techniques haveto be combined with high performance image metrology techniques whichare developed and adapted to the manufactured components. The focus ofthis thesis is the application of enhanced image analysis as a tool for highprecision metrology. Dedicated algorithms have been developed, tested andevaluated in three practical cases ranging from micro manufacturing at submicronprecision to meter sized aerospace components with precision requirementsin the 10 μm range.The latter measurement challenge was solved by low cost standard consumerproducts, i.e. digital cameras in a stereo configuration and structured lightfrom a gobo-projector. Combined with high-precision image analysis and anew approach in camera calibration and 3D reconstruction for precise 3Dshape measurement of meter sized surfaces, the achievement was fulfilledand verified by two conventional measurement systems; a high precisioncoordinate measurement machine and a laser scanner.The sub-micron challenge was the implementation of image metrology forverification of micro manufacturing installations within a joint Europeaninfrastructure network, EUMINAfab. The results were an unpleasant surprisefor some of the participating laboratories, but became a big step forwardto improve the dimensional accuracy of the investigated laser micromachining, micro milling and micro-printing systems, since the accuracy ofthese techniques are very difficult to assess.The third high precision metrology challenge was the measurement of longrange,low-amplitude topographic structures on specular (shiny) aerodynamicsurfaces. In this case Fringe Reflection Technique (FRT) was appliedand image analysis algorithms were used to evaluate the fringe deformationas a measure of the surface slopes to obtain high resolution data. The resultwas compared with an interferometric analysis showing height deviation inthe range of tens of micrometers over a lateral extension of several cm. / <p>QC 20170523</p> / LOCOMACHS / EUMINAfab / Cleansky
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-207594 |
Date | January 2017 |
Creators | Daemi, Bita |
Publisher | KTH, Industriell produktion |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | TRITA-IIP, 1650-1888 ; TRITA IIP-17-05 |
Page generated in 0.002 seconds