Return to search

Experimental and Numerical Investigation of Turbulent Heat Transfer due to Rectangular Impinging Jets

Due to their efficient heat and mass transfer potential, impinging jets have received attention in various applications. Heat transfer and flow characteristics of rectangular turbulent impinging jets issued from a 24:1 aspect ratio and 24:1 contraction ratio nozzle were investigated experimentally and numerically. In the heat transfer measurements; a thin stainless-steel foil was utilized to obtain iso-flux boundary conditions on the impingement surface. The target plate was free to translate in the lateral direction and the heat transfer distributions were determined at 0 ≤ x/W ≤ 20 with the micro-thermocouples placed underneath the foil. The measurements were conducted for Re(j) = 8900 − 48600 at nozzle-to-target spacing of 0.5 ≤ H/W ≤ 12.0. Both semi and fully confined jets were investigated. Heat transfer coefficients at Re(j) = 28100, 36800, 45600 and H/W = 4.0 were determined by using adiabatic-wall temperatures and the distributions were compared with those of the wall shear stress. Off-center peaks were observed at high Re(j) and low H/W. Since the wall distributions are susceptible to nozzle-exit conditions, velocity and turbulence profiles at the nozzle-exit were measured for the velocity range of interest. Additionally, near-wall mean velocity and turbulence profiles were determined at Re(j) = 21500 and 36800 at H/W = 4.0 to have a better understanding of the secondary peaks in the wall distributions. Numerical computations were performed by using several different turbulence models (k − ω, k − ε, V 2F and Reynolds stress models). In wall-bounded turbulent flows, near-wall modeling is crucial. Therefore, the turbulence models eliminating wall functions such as the k − ω and V 2F models may be superior for modeling impingement flows. The numerical results showed reasonable agreement with the experimental data for local heat transfer and skin friction coefficient distributions. The occurrence of the secondary peaks was predicted by the k − ω and V 2F models, and for a few cases with the low-Re-k − ε models. Near-wall measurements along with the computed profiles were used to describe the “secondary peak” phenomena. It was shown that the increase in turbulence production in the wall-streamwise direction enhances turbulent momentum and heat transport in the wall-normal direction which lead to secondary peaks in the wall distributions. The possibility of improving surface heat transfer with fully-developed jets was also explored numerically as a case study.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/195669
Date January 2005
CreatorsDogruoz, Mehmet Baris
ContributorsOrtega, Alfonso, Ortega, Alfonso, Tumin, Anatoli, Jacobs, Jeffrey, Tabor, Michael, Glasner, Karl
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
LanguageEnglish
Detected LanguageEnglish
Typetext, Electronic Dissertation
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0019 seconds