The construction industry in Sweden face increasing demands for sustainability and reduced greenhouse gas emissions and with the introduction of climate declarations for new projects marking a significant development. There is a rising interest in sustainable materials like cross laminated timber (CLT). Analyzing CLT-joists and their complementary materials impact on projects economically, environmentally, and structural performance can enhance decision-making in the early stages of a project. This study conducted a structural-, climate impact-, and cost analysis along with a multicriteria assessment. The structural analysis, based on Eurocodes and using the software FEM-design showed that all joist types met structural requirements, with type 3 being more versatile due to its cooperation with concrete. It also showed that type 11 with its lighter weight made it easier for installations and a possible reduced transport emission. The climate impact analysis, done through an LCA in OneClick LCA, revealed that type 3 had the highest impact mainly due to its concrete layer, while type 9 had the lowest impact. In term of costs, a cost analysis was done with the use of BidCon. The results of the cost analysis showed that type 3 is the most expensive due to its longer installation time and material costs, while type 11 was the cheapest. CLT and concrete were identified as the costliest materials. The multicriteria assessment concluded that type 11 is preferred for its affordability, sustainability, and performance efficiency. However, if solely pursuing sustainability, type 9 could be considered despite its slightly higher costs.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-533363 |
| Date | January 2024 |
| Creators | Konstantynowicz, Kornelia, Karlberg, Patric |
| Publisher | Uppsala universitet, Tillämpad mekanik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds