The thesis deals with the indication of combustion pressures of ignition engines. Introduction is devoted to thermodynamics of combustion engines and their diagrams. The following section describes the methods for measuring the combustion pressures of a spark ignition engine. This chapter describes three basic methods of measurement, the most described of which are piezoelectric sensors. The next part is devoted to the design of the measuring chain and to the description of the material used, which was used for the measurement on the engine under test. The main goal of the thesis was to evaluate the results obtained by measuring at the engine testing center of Mendel Uni-versity in Brno. The data were tabulated and graphically evaluated and subsequently described. At the end of the thesis everything is evaluated and the results summarized.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:426991 |
| Date | January 2018 |
| Creators | Linhart, Roman |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds