Thesis (MEng)--University of Stellenbosch, 2004. / ENGLISH ABSTRACT: Rapid prototyping (RP) technologies have expanded vastly over recent years.
With the advent of new materials along with new processes, each technology
has been contributing to the diversities in different fields of application for the
growing technologies. In the course of improvement, it is however critical to
understand exactly what the capability of each individual technology is in
order to compare future improvements, or even to compare current processes
and technologies.
The objective of this research has been to develop capability profiles of
prominent RP technologies: 3D-Printing (3DP), Selective Laser Sintering
(SLS), and Laminated Object Manufacturing (LOM) - in which different
characteristics of each technology are measured and quantified.
A capability profile may be regarded as a set of building blocks that give a
representation of the RP technology's ability and is defined by quantifying the
following characteristics:
Accuracy (both dimensional- and geometrical accuracy)
Surface finish measures
Strength and elongation
Build time, and
Cost
The significance behind developing capability profiles lies in the need to more
accurately describe and compare each of the different processes - especially
Z Corporation's 3DP, since although this process is regarded as very capable
in many areas, little has been published to substantiate this opinion.
When users of these technologies are pushing the limits of their machines, it
becomes critical to know exactly what these boundaries are in order to know
with some measure of certainty that they will be able to fulfil a certain
customer demand or expectation. For South Africa in particular, the industry's
growing interest in rapid prototyping is triggering inevitable questions as to
whether a certain RP technology can produce the desired solutions to their problems. The South African industry's growing awareness about rapid
prototyping is opening new doors for better solutions to new and existing
problems - but ultimately, before investing money, customers want to know if
RP is going to meet the standards needed to solve their solutions.
On a more general level, this study can also be seen to bear significance in
contributing to research in what has become known as rapid manufacturing
(RM). This term is defined as the manufacture of end-use products using
additive manufacturing techniques. RM must guarantee long-term consistent
component use for the entire product life cycle or for a defined minimal period
for wearing parts [1].
However, before it is possible to guarantee long-term consistency of
components, one must first ensure consistency of the process. Once a
process is consistent, the next question becomes: What is it capable of doing
consistently?
This study aims to answer this question for the three processes (3DP, SLS
and LOM) mentioned earlier. In doing so, this study and its development of
capability profiles, seeks to contribute and be of value in both academic
circles as well as for industry partners and system manufacturers. / AFRIKAANSE OPSOMMING: Snelle Prototipering (SP) tegnologieë het die afgelope jare ongelooflike groei
ondervind. Met die ontwikkeling van nuwe materiale tesame met nuwe
prosesse, het elke tegnologie bygedra tot 'n diversiteit in moontlike
toepassings vir 'n verskeidenheid van velde. Met 'n mikpunt van
aaneenlopende verbetering, is dit egter krities om te verstaan presies wat elke
individuele tegnologie se vermoëns is. Dit maak dit dan moontlik om
toekomstige verbeteringe te vergelyk, of om selfs huidige prosesse met
mekaar te vergelyk.
Die doel van hierdie navorsing was om vermoënsprofiele van prominente SP
tegnologieë te ontwikkel: 3D-Printing (3DP), Selective Laser Sintering (SLS)
en Laminated Object Manufacturing (LOM) - waarin verskillende
karaktereienskappe van elke tegnologie gemeet en gekwantifiseer word.
'n Vermoënsprofiel mag beskou word as 'n stel boustene wat 'n weerspieëling
gee van die SP tegnologie se vermoë en word gedefinieer deur die
kwantifisering van die volgende karaktereienskappe:
Akkuraatheid (beide dimensionele- en geometriese akkuraatheid)
Oppervlakgehalte metings
Treksterktes en verlengings
Bou- of vervaardigingstye, en
Kostes
Die rede waarom dit belangrik is om vermoënsprofiele te ontwikkel berus by
die behoefte om die verskillende prosesse met meer akkuraatheid te beskryf
en te vergelyk - veral Z Corporation se 3DP. Alhoewel hierdie proses
algemeen beskou word as baie bevoeg in vele areas, is min informasie al
gepubliseer om hierdie opinie te ondersteun.
Wanneer gebruikers van hierdie tegnologieë hul masjiene tot die limiete druk,
begin dit krities raak om presies te weet wat daardie grense is, sodat hulle
met 'n sekere mate van sekerheid sal kan sê of hulle sal kan voldoen aan
kliënte se behoeftes of verwagtinge. Die Suid-Afrikaanse industrie se belangstelling in SP tegnologieë begin al hoe meer groei, en daarmee saam,
begin vrae ontstaan tot watter mate snelle prototipering wel werkbare
oplossings kan produseer vir hul probleme. Hierdie groeiende bewustheid van
die Suid-Afrikaanse industrie begin dus ook nou nuwe paaie openbaar vir
beide nuwe en ou probleme - maar uiteindelik, voordat kliënte egter bereid
sal wees om geld te belê, sal hulle wil weet of snelle prototipering die
standaarde gaan behaal wat nodig sal wees om juis hierdie oplossings te
verwesenlik.
Op 'n meer breë vlak, beoog hierdie studie om ook 'n bydrae te maak in die
groeiende navorsingsveld van snelle vervaardiging (SV). Hierdie is 'n term wat
gedefinieer word as die vervaardiging van endgebruiker produkte, met die
benutting van byvoegings-vervaardigings tegnieke. SV moet versekering bied
vir komponente se werkverrigting op die lange duur vir die hele produk se
lewenssiklus, of ten minste vir 'n gedefinieerde minimale tydperk in die geval
van slytasie-parte [1].
Maar voordat dit moontlik sal wees om hierdie versekering te bied, moet mens
eers die versekering kan bied van 'n proses se werkverrigting. Wanneer die
prosesse betroubaar en deurlopende resultate lewer, word die volgende
logiese vraag gestel: Wat presies, is hierdie proses in staat om betroubaar te
lewer?
Hierdie studie beoog om juis hierdie vraag te beantwoord vir die drie prosesse
(3DP, SLS en LOM) wat vroeër genoem is. Dienooreenkomstig, met die
ontwikkeling van vermoënsprofiele van hierdie prosesse, behoort hierdie
studie van waarde te wees vir beide akademici, sowel as industrie-lede en
vervaardigers van SP tegnologieë.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/53724 |
Date | 03 1900 |
Creators | De Beer, Neal |
Contributors | Dimitrov, D. M., Stellenbosch University. Faculty of Engineering. Dept. of Industrial Engineering. |
Publisher | Stellenbosch : Stellenbosch University |
Source Sets | South African National ETD Portal |
Language | en_ZA |
Detected Language | Unknown |
Type | Thesis |
Format | 100 p. : ill. |
Rights | Stellenbosch University |
Page generated in 0.0027 seconds