This report documents the measurements of turbulence quantities resulting from vortices embedded in a zero pressure gradient turbulent boundary layer. Turbulent boundary layers are found in most flow regimes over large scale vehicles and have been studied for many years. Various systems to control separation of boundary layers have been proposed, but vortex generators have proven to be an economical choice as they are often used to fix deficiencies in a flow field after large scale production of a vehicle has commenced. In order to better understand the interaction between vortex generators and the boundary layer in which they are embedded, an experiment has been performed using through non-invasive Comprehensive Laser Doppler Velocimeter.
The results show that normalization on edge velocity is appropriate for comparison with previous work. The 1/S parameter and vq^2 parameter were found to be most appropriate to correlate the Reynolds stresses and triple products, respectively. The higher inflow edge velocity and greater momentum thickness, creating a lower vortex generator to boundary layer height ratio, result in a more diffuse vortex as compared to previous work conducted in the same wind tunnel, with the same geometry, but with different inflow conditions. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/32776 |
| Date | 05 June 2012 |
| Creators | Derlaga, Joseph Michael |
| Contributors | Aerospace and Ocean Engineering, Simpson, Roger L., Devenport, William J., Roy, Christopher J. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | Derlaga_JM_T_2012.pdf |
Page generated in 0.0336 seconds