LGP( Light Guide Plate) is the important part of the BLM(Back Light Modulus). It makes the BLM high illuminance and uniformity with leading light direction. LED(Light Emitting Diode) is the light source of the BLM. In this study there are V-Cut of the micro-structure applying on the LGP to discuss and research with optical simulation software TracePro.
A 2.5 inch BLM with LED is building to analysis. First, the beginning side of the LGP has been studied with V-Cut. The purpose is making the distribution angel larger and upgrading brightness. Then, with the V-Cut micro-structure on the out-light surface and optical sheets get the largest light availability ratio. Finally, the reflect surface divides to five parts with different pitches design. The results show the good benefit by more uniformly light distribution and illuminance.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0910108-042421 |
Date | 10 September 2008 |
Creators | Yang, Yu-bin |
Contributors | Tsay, Der-Min, Yung-Chuan Chen, Shyh-Chour Huang, Tsai,Ying-Chien, Jao-Hwa Kuang |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0910108-042421 |
Rights | not_available, Copyright information available at source archive |
Page generated in 0.0011 seconds